© Copyright 2021 Richter Baubedarf - All Rights reserved.

BAUBEDARF

One-day Injection Packer Ø 13,5 mm

Our patented cooperating locking element secures that after unscrewing the threaded sleeve the rubber sleeve remains reliably clamped. In our video (filmed at AUSBILDUNGSZENTRUM BAU) you can see an extreme test.

At 6:20 min. of the video, a test begins, where it is tried to push the frontpart of our One-day Injection Packer with high pressure through the borehole. The result was that our One-day Injection Packers front part was stable under pressure until the concrete block bursted at about 330 bar.

A check valve block in the screw shaft (Opening pressure about 35 bar) of our One-day Injection Packer is tested by compressed air, because we attach great importance to the reliability and sealing of our valves. To ensure that there is a functioning valve in each One-day Injection Packer, we test each of them with compressed air.

Segmented rubber sleeve having a very rough surface. Through the four rubber segments four seals are formed from the screwing. On our video (filmed at AUSBILDUNGSZENTRUM BAU) are two extreme tests in slippery holes that were intentionally filled with oil (begin: 8:33 min. of the video).

High-strength screw Packer made of tempering steel. Our Packers can be tightened much more than other Injection Packer with a screw of cutting steel.

Borehole: 14 mm

Available length: 100 mm and 180 mm

Technical description:

Can be unscrewed after injection.

No second visit for removing the Packer needed!

German

Privacy statement